What are the construction requirements of Huisen rope saw

Huisen rope saw is a cutting and disassembly tool for thick concrete, irregular concrete steel bars, mines, blocks, curved plates, large slabs, bridges and roads. Easy to install, flexible to use, horizontal cutting, vertical cutting. The following can understand the composition of Huisen rope saw equipment structure.

Huisen wire saw is a kind of saw which is designed by using the principle of wire saw to cut hard and brittle materials.

The composition of Huisen rope saw: Huisen rope saw drive, flywheel, guide wheel, wire saw chain (diamond material).

construction requirements of huisen rope saw:

(1) Fixed wire saw and guide wheel

M16 chemical anchors are used to secure the primary and secondary legs of the wire saw. The installation of the guide wheel needs to be stable, and the wheel edge needs to be aligned with the center line of the threaded hole to ensure the effective cutting speed of the cutting surface and strictly implement the installation accuracy requirements. This is our great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great, great

(2) Install rope

According to the determined cutting form, wind the diamond wire on the driving wheel and the auxiliary wheel in a certain order, and the direction of the wire should be consistent with the driving direction of the driving wheel

(3) Connection of relevant operating systems and technical measures for safety protection

According to the site situation, the connection of water, electricity, mechanical equipment and other related pipelines should be correct, standardized and relatively centralized, and the wiring should be strictly in accordance with the safety operation procedures to prevent accidents caused by multiple aircraft, auxiliary equipment and materials. In the process of rope breaking, safety guardrails need to be set up in front of the rope movement direction, and safety signs should be set up in a certain area to remind pedestrians not to enter the construction area. Kan

(4) Cutting

Start the motor, adjust the lifting tension of the driving wheel through the control panel to ensure that the Huisen wire saw is properly tightened, supply circulating cooling water, and then start another motor to drive the driving wheel to drive the diamond wire to rotate and cut. During the cutting process, it is necessary to closely observe the stability of the base and adjust the deflection of the guide wheel at any time to ensure that the cutting rope is in the same plane. Kan

(5) the choice of cutting parameters

Huisen wire saw in the cutting process, through the operation of the control panel to adjust the cutting parameters, to ensure that the diamond wire running speed of about 20 m/s. On the other hand, in the cutting process to ensure sufficient flushing liquid, to ensure the diamond wire cooling and wear debris away. Cutting operations to achieve stable speed, stable parameters, stable equipment. Kan

(6) Problems in the cutting process

In case of rope jam, broken rope and other phenomena, corresponding measures should be taken to solve. Safety protection measures should be strict, otherwise the diamond beads on the broken diamond rope will fly out, very sharp will hurt people. Therefore, except for taking necessary protective measures, irrelevant personnel shall not enter the site.

the scope of application of huisen rope saw:

Mining, block forming, plate cutting, bridge cutting, beam cutting, underwater cutting, etc.