Production Process of Huisen Cutter Head

Release time:

2021-08-17

In the production of Huisen cutter head, the selection of raw materials for the embryo body of Huisen cutter head and the corresponding hot pressing process are quite key steps in the production process. Among them, bronze-based alloy system and the like are selected as the raw materials of ligands. However, the manufacturing cost and use function of the manufacturer cannot achieve the best of both worlds. After horizontal analysis, people have proposed materials made of various alloys as raw materials for the embryo body, after many attempts and applications, we have achieved a more ideal method of cost and function.

The production process of Huisen cutter head can be said to be a sintering process of metal powder under a certain pressure. As a process of metal metallurgy, it mixes a variety of metal powders. Under the action of high temperature and certain pressure, the powder particles in the refining process are diffused, welded and combined, as well as crystallized and other physical and chemical dip to form a sintered body with a fixed shape and machine function, that is, Huisen cutter head, and there are relatively strict requirements for the foundation of the saw blade cutter head carcass material.

The sintered body has certain external impact resistance and an appropriate hardness, which is to ensure that the wrapped raw materials, through mechanical bonding and moderate wear resistance to the rock, can achieve the powder metallurgy process required by the above functions under a certain lower sintering temperature and a lower heat preservation time, which is to alleviate the deterioration trend of the metal element.

The alloy components in the embryo alloy can adopt diamond single crystal, and at the same time, chemical bonds are generated between the alloy components and diamond through trace elements, so as to further process diamond. The method of powder kneading ribs can make the raw materials of the raw cutter head follow the formed alloy, have similar structure, and realize alloying. However, there are many kinds of images in the alloy, so the alloy between components with similar electron chemistry and atomic radius will be biased towards the natural melt, and the crystal lattice will produce strange changes in the process of natural evolution from the solid melt, which will increase the resistance when the gold lattice moves, thus improving the strength and hardness of the Huisen cutter head.

According to the requirements of the raw material of the saw blade Huisen cutter head, some alloys that are easy to form solid solution phase in the carcass alloy and produce solid solution strengthening can be selected as a factor of the carcass. The produced cutter head is installed on the body after different installation methods, and after strict polishing by the manufacturer and painting, it is made into corresponding products, which are then widely used in various life and production processes, it has played a very important role. Today's introduction to Huisen cutter head ends here. I hope it can help you better understand the production process of Huisen cutter head.

Previous Page: Diamond Segment in Huisen Segment

Next Page: Present Situation of Marble Wire Saw in Stone Industry

Huisen rope saw is a cutting equipment driven by a hydraulic power unit, which can cut thick concrete. Is the demolition, maintenance, basement, chimney, column cutting suitable cutting construction equipment.

What are the construction requirements of Huisen rope saw

Huisen rope saw is a cutting and disassembly tool for thick concrete, irregular concrete steel bars, mines, blocks, curved plates, large slabs, bridges and roads. Easy to install, flexible to use, horizontal cutting, vertical cutting. The following can understand the composition of Huisen rope saw equipment structure.

What is the construction point of steel mixed rope saw?

The steel-mixed rope saw is a cutting and demolition tool for mining, wasteland, Hu ban, large slab stone, thick concrete, irregular concrete steel bars, bridges and roads, etc. Easy to install, flexible use method, can be horizontal shear, vertical shear. The following is the composition of the equipment structure and the differentiated types of wire saws. The composition of the rope saw, rope saw drive, flywheel, guide wheel, rope saw chain (made of diamond material).

Discussion on the Use and Characteristics of Steel-mixed Rope Saw

According to actual needs and uses, steel-mixed rope saws on the market can be divided into concrete cutting rope saws, granite, mining rope saws, granite wasteland forming rope saws, granite special-shaped processing saws, marble mining rope saws, marble mineral forming rope Saws, marble special-shaped processing rope saws and other 7 categories.

Diamond Segment in Huisen Segment

In the Huisen head is a special diamond head. As a part of the main body of the diamond saw blade, this type of product in Huisen head is made of diamond and matrix binder. As a very hard material, diamond can play the role of cutting edge.

Production Process of Huisen Cutter Head